|
K4101, K4101/05, K4201, K4201/05, K4202, K4203, K4204, K4205, K4406, K4407, K4408, K4409, K4410
- Door entry phone systems with 1 - 10 call buttons
- High standard SRS Vandal Resistant audio door entry kits. The panel thickness is 2.5mm BS316 marine grade stainless steel.
- Very tough and suitable for most applications these kits compare very favourably with other door entry systems by combining enhanced features same day availability and the highest specification.
- All stainless steel, engineer friendly door entry panel
Follow these links for useful additional information
Training Notes
The kits with keypad built into the panel consist of
- vandal resistant stainless steel entrance panel
- Panels in kits also come with NPCLEAR name plates
- 9307.1 power supply
- note 9307.2 is not required because lock timer relay is available from the keypad.
- AN9102S telephone(s)
- One for each button on the panel
The kits without a keypad built into the panel consist of:
- vandal resistant stainless steel entrance panel
- Panels in kits also come with NPCLEAR name plates
- 9307.1 power supply
- 9307.2 lock timer relay
- AN9102S telephone(s)
- One for each button on the panel
These kits are ideal for a variety of installations because of the following features.
- The door entry panel
- There are 2 basic sizes
- A size is 250mm high x 136mm wide x 35mm deep (50mm deep on panel 4 way and above)
- D size is 321mm high x 181mm wide x 50mm deep
- The front plate is supported when open, making the panel engineer friendly.
- The panels are supplied for flush fitting, however they can be fitted on the surface by adding a BS316 stainless steel rain hood.
- Use 3505/50 for A size panels
- Use 3506/50 for D size panels
- The door entry panels are vandal resistant and designed to with stand all but the most determined attack.
- See the vandal resistant panels guide for further information.
- The telephone handset
- The phone cord is a very flexible and suitable in situations with repetitive use (ie reception phone)
- The phone has a lock release button and a spare button
- The system power supply
- The power supply offers 12V AC and 12V DC power outputs (500mA on each output)
- The system incudes timer relay for the locking device which is adjustable from 1 - 99 seconds
- The system can be connected to a gate controller or access control without any additional interface relay
- The connections are simple
- Convertional 5 wire technology
|
panel for K4101/05
panel for K4205
panel for K4409
hoods and frames
telephone for kits
power supply for kits
|
