1. From the Card Holder window, select the Card Holder you wish to modify in the list by clicking on the correct line.
   
2. Click the 'Change Card Holder Information' icon (or double click line in list)
   
3. A new window opens which allows you to edit the card holder name, card number, department and some other information if you require. You must enter at least:
   
   1. Last Name
      
   2. Card Number
      
   3. Department
      

   TIP
   You may copy (Edit>>Copy) a Windows Metafile picture (Open the file using Paint), and paste (Edit>>Paste) it into the picture field. Click on the field to select it, whislt in the CardHolder Add/Modify window.
   

4. When you have entered the required information, click the green tick icon and the window will close. The new card holder will be added to the list in the Card Holder set up window.
   
5. You should click the close window button (top left) to exit the Card Holders window and return to the Main Event window in order to continue to receive events from the SMART network.
   

TIP
If you experience any problems relating to a single card holder, first check that it is permitted at the door and at that time. If this is correct then refresh that card.