Doors - Add a Door

<% set SRSDB = Server.CreateObject("ADODB.Connection") SRSDB.open "SRS","sa","cheese" Set Session("SRS") = SRSDB %> Doors - Add a Door

Smart.net access control

User Guide

	Getting Started
	Card Holders
	Departments
	Time Zones
	Doors Setup
Getting Started Check Door comms Grant Access Open Door Close Door Add New Door Change Door parameters Refresh Doors Doors in Free Access
	Reporting
	Operators
	System Setup

Doors

	Add a Door
	This button should only be used when a new door controller has been fitted and tested. See the Door Controller installation manual. Make sure that the DIP switch settings are set to the next number. eg. if you currently have 3 doors on the system and wish to add a 4th, make sure the door controller DIP switch settings are set to binary 4. Click the button Add New Door. A dialogue will confirm that you really want to add a new door. The Add / Modify Door window opens FIG. 36. Here you can name the door, set the lock time etc. Click the green tick button to apply the information entered. TIP The network must be completely powered down when adding new doors (physical) to the system, and be carried out by trained security installers.